X

Helpful hints and guides to make the most out of our Apps and Accessories.

easyTek Support

The easyTek in detail

(1) Multi-function button

(1) Multi-function button

(2) Neckloop antenna

(3) Microphone openings

(4) Status information with LED indicators

(5) Neckloop ports

(6) Volume buttons

(7) Port for audio devices with 3.5 mm jack

(8) Port for FM receiver

(9) Reset button

(10) Micro-USB port for charging

Easy pairing.

Hearing aids: Step 1

Put easyTek around your customer’s neck. Turn easyTek on by pressing until the green LED turns on.

Hearing aids: Step 1

Hearing aids: Step 2

Put the hearing aids into the ears and turn them on. The green LED flashes briefly and then slowly fades. Now the hearing aids are paired.

Hearing aids: Step 2

Bluetooth-enabled devices: Step 1

Turn easyTek on by pressing and holding for several seconds. If the blue LED does not automatically start flashing, press and until it does.

Bluetooth-enabled devices: Step 1

Bluetooth-enabled devices: Step 2

Turn on the device’s Bluetooth function. Search for easyTek and select it. The blue LED flashes briefly and then slowly fades.

Bluetooth-enabled devices: Step 2

Transmitter: Step 1

Turn easyTek on by pressing and holding for several seconds. Press buttons simultaneously until the blue LED and the green LED flash.

Transmitter: Step 1

Transmitter: Step 2

Turn the transmitter on within 1m of easyTek and wait for the pairing to complete. This takes approximately 2 minutes. The blue LED will stop flashing and remain on.

Transmitter: Step 2